Up       

Kits Available:

 

 


 


BVM Technical Support: [email protected]

 

HSDJETS Double S-EDF90mm HME-262 Green Camo Colors PNP

 

 

Pricing and availability subject to change without notice.
If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.


     

Click on images to enlarge

SPECIFICATIONS:
Wingspan  1890 mm (74.4 in)
Length  1626 mm (64 in)
Flying Weight  7kg (15.4 lb)
Flying time  About 5 mins
Wing area  52.3 dm2
Wing load  133.8 g/dm2
Main material  35 times EPO
Painting surface Matte environmental water-borne paint + decal + Gloss oil
Suitable experience level □Zero basis □Beginner
Intermediate □Advanced
PNP Assembly difficulty □
10mins ■★☆30mins □★★60mins
Suitable for ambient temperature 0
℃-40
Radio System 7 channel (required & not included)
Control System MFC-2085-DR
Motor 3560-1550KV(Outer rotor)x2 pcs
EDF S-EDF 90mm 12 Bladex2 pcs
ESC 100Ax2 pcs

Servos 
25gx2 Metal gear with 480mm lead (left & right ailerons forward)
25gx2 Metal gear with 330mm lead (left & right outer flap forward)
25gx1 Metal gear with 230mm lead (Vertical tail forward)
25gx4 Metal gear with 80mm lead (Elevatorx2 & L/R inner flap forward)
7.4V 12gx1 Metal gear with 320mm lead with protection function (Nose wheel steering forward)
7.4V 12gx1 Metal gear with 320mm lead with protection function (Front wheel cover plate forward)
7.4V 12gx2 Metal gear with 80mm lead with protection function (Rear wheel cover plate forward)
Recommended Power Battery 6S,22.2V,5000-6000mAh,45Cx2,LiPo with AS150 type plug (required & not included)
Recommended Receiver Battery 2S,7.4V,1800-2000mAhx2,LiPo with XT60 type plug (required & not included)
Ailerons Yes
Flaps Yes
Elevator (Horizontal tail) Yes
Rudder (Vertical tail) Yes
LED lights system Yes
Electromagnetic brake system Yes
Reinforced gyro Selective configuration (not included)
Packaging / Size Packing Box + Outer Box (Card mark)/1400x525x335(mm)
CG (Center of Gravity) 145
-150mm from the leading edge of the Main Wing
Landing Gears All metal hydraulic simulation electric retractable landing gearx3
Battery Charger LiPo battery charger (required & not included)

PACKAGE INCLUDES:
Fuselagex1 pcs
Left main wingx1 pcs
Right main wingx1 pcs
Nosex1 pcs
Vertical tailx1 pcs
Left power groupx1 pcs
Right power groupx1 pcs
Left Horizontal tailx1 pcs
Right Horizontal tailx1 pcs
Main wing bolt rod L=670mm external diameter 16mmx1 pcs
Horizontal Stabilizer bolt rod L=500mm external diameter 6mmx1 pcs
Accessories Bag 1x1 pcs
Screw (HA3x10mm)x16 pcs (S-EDF)
Screw (HM3x10mm)x20 pcs
Accessories Bag 2x1 pcs
100mm signal line (JR male+JR male)x8 pcs
100mm High precision Y-line (JR male+JR male)x1 pcs
HME-262 Manualx1 pcs
MFC-2085 Manualx1 pcs

REQUIRES:
7 channel radio system (radio & receiver) (required & not included)
6S,22.2V,5000
-6000,45Cx2,LiPo with XT90 type plug (required & not included)
2S,7.4V,1800-2000mAhx2,LiPo with XT60 type plug (required & not included)
LiPo battery charger (required & not included)

HSDJETS HME262 ASSEMBLY AND PREFLIGHT INSTRUCTIONS.pdf

 

 

click on images to enlarge

   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   
   

 

 

Q: What does KIT means?

A: It means aircraft comes without any electronic equipment, such as motor, ESC, servos, remote control, battery, etc. Clients have to buy these equipment themselves.

 

Q: What does KIT+L means?

A: It's a KIT version but comes with landing gear installed.

 

Q: What does PNP means?

A: It means the aircraft got equipment already installed and tested, but clients have to buy remote control, receiver, battery and the charger themselves. For example: servos, ESC, power system, landing gear, control system (UBEC included but no power supply), light cables (according to the model of aircrafts). It's a 90% installation. Note: turbojet series products do not include turbojet engine.

 

Q: What does PNP+T means?

A: It's a PNP version with engine (general means turbine) installed and tested. It's a 95% installation.

 

Q: What does RTF means?

A: It means the aircraft comes with completely equipment installation (including battery supply, charger, remote control and receiver). It's a 100% installation.

 

 

Contact Us
All graphics, photos, and text Copyright 2021 BVM, Inc.
Use of graphics or photos without written permission from BVM is strictly prohibited.