Up       

Kits Available:

 

 


 

BVM Technical Support: [email protected]

 

 

 

HSDJETS S-EDF 105mm HF-16 V2 Belgian Colors PNP

 

 

Pricing and availability subject to change without notice.
If you need an expedited order, please call BVM to verify the stock BEFORE placing the order.

          

Click on images to enlarge

SPECIFICATIONS:
Wingspan: 1245mm (49in)
Length: 1809mm (71.2in)
Flying Weight: 6.1kg (13.4 lb) w/ 12s
S-EDF/Motor: S-EDF 105mm 4270/750KV brushless
Number of EDF Blade: 11 blades
Cruising speed: about 180 km/h
Flying time: about 3-5 mins
Wing area: 47 dm2
Wing load: 129.8 g/dm2
Main material: 35 times EPO
Painting surface: matte paint
Suitable experience level □Zero basis □Beginner □Intermediate ■Advanced
PNP Assembly difficulty □10mins ■30mins □60mins
Suitable for ambient temperature: 0-4℃
Radio System: 6 channel (required & not included)
ESC: 160A/12S Hobbywing AS150
Control System: MFC-2085

Servos
25gx4 Metal gear with 150mm lead (Elevator & ailerons)
12gx1 Metal gear with 260mm lead (Rudder)
12gx1 Metal gear with 600mm lead (Nose wheel steering)
12gx1 Metal gear with 460mm lead Rev (Nose door servo)
12gx1 Metal gear with 400mm lead Rev (left door servo)
12gx1 Metal gear with 400mm lead (Right door servo)
12gx3 Metal gear (360degree lock Hatch cover)
Recommended MFC-2085 Battery: 2S,7.4V,1800-2000mAhx 2,LiPo with XT60 or T type plug (required & not included)
Recommended Power Battery: 6S,22.2V,5000-6000mAhx2,LiPo with AS150 type plug (required & not included)
Ailerons: Yes
Flaps: No
Elevator (Horizontal tail) Yes
Rudder (Vertical tail) Yes
General landing gear control system No
LED lights system Yes
Electromagnetic brake system Yes
Reinforced gyro Selective configuration (not included)
Packaging / Size Packing Box + Outer Box (Card mark) /145.6x51.8x33.7(cm)
CG (Center of Gravity) 178mm from the leading edge of the Main Wing
Landing Gears Metal electric retractable hydraulic landing gearx3
Battery Charger LiPo battery charger (required & not included)

PACKAGE INCLUDES:
Fuselagex1
Left Wingx1
Right Wingx1
Left Horizontal Stabilizerx1
Right Horizontal Stabilizerx1
Vertical Stabilizerx1
Nosex1
Cockpit canopyx1
Left missilex1
Right missilex1
Left tail finx1
Right tail finx1
Main wing carbon tube L=715mm diameter=10mm
White Stickerx1
Accessories Bag 1 x1
Nylon airspeed tubex1
Nylon antennax1
Pull rod(1.5×52mm)x1(Fit the chuck)
Nylon rudder anglex3
Nylon rudder angle gasketx3
Screw (PM3x10mm)x4 (Wing)
Screw (PA3x10mm)x4 (Vertical Stabilizer)
Screw (PA2x12mm)x3
Screw (PA3x15mm)x1 (Nose)
Long rocker armx1
Nylon chuckx2
Manualx1

REQUIRES:
6 channel radio system (radio & receiver)
2S,7.4V,1800-2000mAh,LiPo with XT60 or T type plug (required & not included)
6S,22.2V,5000-6000mAhx2,LiPo with AS150 type plug (required & not included)
6Sx2 LiPo battery charger


HSDJETS EDF 105mm F-16 Assembly Manual.pdf




click on images to enlarge

   
   
   
   
   
   

 

Q: What does KIT means?

A: It means aircraft comes without any electronic equipment, such as motor, ESC, servos, remote control, battery, etc. Clients have to buy these equipment themselves.

 

Q: What does KIT+L means?

A: It's a KIT version but comes with landing gear installed.

 

Q: What does PNP means?

A: It means the aircraft got equipment already installed and tested, but clients have to buy remote control, receiver, battery and the charger themselves. For example: servos, ESC, power system, landing gear, control system (UBEC included but no power supply), light cables (according to the model of aircrafts). It's a 90% installation. Note: turbojet series products do not include turbojet engine.

 

Q: What does PNP+T means?

A: It's a PNP version with engine (general means turbine) installed and tested. It's a 95% installation.

 

Q: What does RTF means?

A: It means the aircraft comes with completely equipment installation (including battery supply, charger, remote control and receiver). It's a 100% installation.

 

 

Contact Us
All graphics, photos, and text Copyright 2020 BVM, Inc.
Use of graphics or photos without written permission from BVM is strictly prohibited.